AzureFeeds

In previous posts of this series, we mapped where exposure can exist when organizations deploy Microsoft 365 Copilot and categorized those risks into two distinct layers. Layer 1 covers risks associated with people who can access Microsoft 365 Copilot. Layer 2 covers risks associated with data Microsoft 365 Copilot can access.  

Layer 2 risks are governed primarily by the Apps and Data pillars of Zero Trust, with Identity playing a secondary role in defining the scope of data each user can reach. Organizations can address these risks with Microsoft controls such as Microsoft Purview, SharePoint Advanced Management, Microsoft Entra ID Governance, and Microsoft Sentinel. The work is configuring and scoping them deliberately before Copilot scales across the organization. 

How to read this post 

Each section recaps one risk, describes the mitigation, names the Microsoft control that delivers it, and includes a placeholder for the supporting screenshot. Controls are cumulative—sensitivity labels, DLP policies, and audit logs work together across risks, so several mitigations reinforce one another.

R7: Overshared SharePoint and OneDrive content 

Pillar: Apps and Identity 

Content shared with “Everyone,” “Everyone except external users,” or broad security groups becomes part of Copilot’s queryable surface for any licensed user—even if that user would never have manually located those files. Years of SharePoint oversharing, combined with Copilot’s ability to traverse and synthesize content in a single prompt, can turn long-standing governance debt into immediate exposure. Copilot makes data once hidden by volume discoverable by intent. 

Mitigation starts by understanding what is overshared, then systematically tightening the sharing scope before Copilot scales. 

What to do:

• Use Restricted SharePoint Search (RSS) during the Copilot pilot as a temporary way to narrow the SharePoint sites Copilot can ground against while you review permissions and governance controls before broad rollout. Then turn it off after validation rather than treating it as a long-term control. 


• Use SharePoint Advanced Management (SAM) to run data access governance reports and identify sites with “Everyone” or “Everyone except external users” sharing links—prioritize sites holding financial, HR, legal, or project data.


• Remove or replace broad sharing links with scoped permissions; replace “Anyone” links with site-member access and require expiration dates on sharing links going forward.


• Run Microsoft Entra ID Access Reviews scoped to Microsoft 365 groups and SharePoint site members to catch stale memberships that expand Copilot’s grounding surface. 


• 
  

  Use Microsoft Purview Content Explorer to inventory which sites and libraries contain sensitive content and cross-reference with sharing scope.

  
  

SharePoint Advanced Management: data access governance report showing sites with broad sharing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R8: Sensitivity label gaps 

Pillar: Apps and Data 

Microsoft Purview sensitivity labels help classify content by sensitivity and, together with Purview policy controls, shape how that content can be used in Microsoft 365 Copilot. Unlabeled, mislabeled, or improperly inherited content is harder to govern consistently. Mitigation requires both discovering what is unlabeled and closing the labeling gap at scale through policy, rather than relying on manual user action. 

What to do:

• Turn on mandatory labeling in Microsoft Purview so users cannot save or share documents without applying a label—preventing new unlabeled content from accumulating.


• Configure auto-labeling policies in Microsoft Purview to classify content at rest and in transit using built-in sensitive information types (SITs) and trainable classifiers—prioritizing SharePoint libraries and OneDrive for Business.


• Apply default sensitivity labels to SharePoint document libraries and Teams channels so that content inherits a baseline label even when users do not label manually.


• Turn on container-level label inheritance so that SharePoint sites and Teams workspaces propagate sensitivity settings to documents created within them.


• Use Microsoft Purview Content Explorer to quantify the volume of unlabeled content across the tenant and track labeling progress over time. 

Microsoft Purview: auto-labeling policy scoped to SharePoint and OneDrive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SharePoint document library: default sensitivity label applied to the library

 

 

 

 

 

 

 

 

 

 

 

 

 

Content Explorer: labeled vs. unlabeled content breakdown by location

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R9: Excessive user permissions 

Pillar: Identity and Apps 

Copilot follows each user’s existing Microsoft Graph permissions and does not surface content the user cannot access. However, in many enterprise environments, users accumulate access far beyond their current role through leftover project permissions, broad temporary group memberships, and inherited rights from outdated organizational structures. Copilot does not create this overprovisioning, but it makes the full scope of that access immediately visible and usable. What previously required sustained effort to locate and correlate can now be surfaced in a single prompt. 

Mitigation focuses on continuously right-sizing permissions to reflect actual role requirements, not historical accumulation. 

What to do:

• Run Microsoft Entra ID access reviews on a recurring schedule for all Microsoft 365 groups, SharePoint sites, and Teams with access to sensitive content. Require reviewers to justify continued membership rather than defaulting to approval. 


• Use SharePoint Advanced Management inactive site policies to identify and deprovision sites no longer in active use whose permissions have never been cleaned up.


• Audit group memberships for broad “Edit” or “Full Control” rights and replace with scoped contributor roles aligned to current job function.


• Apply the principle of least privilege to new project groups from the start: time-bound membership with expiration dates, and access reviews triggered at project close.


• Review service account and application permissions in Microsoft Graph to ensure only humans hold standing access to content that Copilot can query. 

SharePoint Advanced Management: inactive sites report

 

 

 

 

 

 

 

 

 

 

 

 

 

Microsoft 365 admin center: group expiration policy configuration

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R10: No DLP coverage on Copilot-generated outputs 

Pillar: Apps and Data 

Copilot outputs—including summaries, drafts, and synthesized answers—can move sensitive information into new contexts, such as chats, emails, pages, and documents. Mitigation extends DLP coverage explicitly to Copilot interactions, grounding data, and downstream locations where generated content may be stored or shared. 

What to do:

• Use Microsoft Purview DLP for Microsoft 365 Copilot and Copilot Chat to block or audit sensitive prompts, limit external web search when prompts contain sensitive data, and restrict Copilot from using specified labeled files and emails as grounding data. 


• Configure communication DLP policies for Teams and Exchange so that Copilot-generated content pasted into messages, emails, or chats is evaluated against the same sensitive information type rules as source documents.


• Turn on endpoint DLP on managed Windows devices to catch sensitive content that exits by way of clipboard paste, file save, or upload to unmanaged locations after being generated by Copilot.


• Review DLP policy coverage for Copilot Pages and other Copilot output surfaces so that synthesized content stored or shared from those surfaces is governed consistently.


• Regularly review DLP policy simulation reports to validate that rules fire against realistic Copilot output patterns, not just keyword matches in source files. 

Microsoft Purview: DLP policy scoped to Microsoft 365 Copilot workload

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Endpoint DLP: activity explorer showing Copilot-related policy matches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R11: Plugin and connector data surface expansion 

Pillar: Apps and Identity 

Organizations can extend Microsoft 365 Copilot through plugins and Microsoft Graph connectors that pull external data from CRM systems, ITSM platforms, HR applications, and custom line-of-business tools. Each connector expands the data surface Copilot can query on a user’s behalf and often reaches into systems where access control models do not align natively with Microsoft 365 permissions. As organizations add connectors without reviewing their scope and governance, each connected source introduces risk that scales alongside the broader Copilot data surface. 

Mitigation requires deliberate governance over which connectors and plugins are turned on, for whom, and under what conditions—before the connected surface grows beyond visibility. 

What to do: 

• Review and restrict which Copilot plugins and Graph connectors are enabled in the Microsoft 365 admin center, disable connectors not actively required, and require admin approval for new connector deployments. 


• Scope each approved connector to the minimum data set and user population it needs: not all Copilot users should have access to every connected source. 


• Audit the permission model of each external system behind a connector. Verify that the connector enforces source-system access control and does not flatten permissions for all Copilot users. 


• Log and review connector activity in the Microsoft 365 audit log to detect unexpected query patterns or unusually broad data retrieval through connected sources. 

Microsoft 365 admin center: Copilot plugins and connectors management page

 

 

 

 

 

 

 

 

 

 

 

 

 

Microsoft Graph connector: connection status and scoped user access settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R12: Audit and visibility gap 

Pillar: Apps and Data 

Organizations need visibility into Copilot activity so they can investigate suspicious behavior, monitor adoption, and understand which content sources are involved. Disabling Copilot interaction logging, retaining audit logs for too short a period, or failing to forward logs to a SIEM leaves organizations without the evidence needed to detect anomalous usage patterns, or support incident response. Mitigation requires turning on the right audit tier, retaining logs long enough to support investigation, and building those signals into security operations. 

What to do: 

• Verify that Microsoft Purview Audit (Standard or Premium) is enabled for the tenant and that Copilot interaction events are being captured. Confirm in the Purview compliance portal that Copilot activities appear under the Audit search. 


• Upgrade to Microsoft Purview Audit Premium for high-risk user populations—including privileged identities and users with access to sensitive sites—to extend log retention up to ten years and gain access to intelligent insights.


• Set a minimum audit log retention of 90 days for all users; extend to 180 days or longer for any user group that accesses sensitive or regulated content through Copilot.


• Forward Microsoft 365 audit logs to Microsoft Sentinel (or the organization’s existing SIEM) to correlate Copilot activity with endpoint, identity, and network signals and to turn on automated detection rules.


• Review Microsoft 365 Copilot usage reports in the admin center regularly to identify unusual query volumes, off-hours activity, or access to unexpected content sources. 

Microsoft Purview Audit: Copilot interaction events in audit search

 

 

 

 

 

 

 

 

 

 

 

 

 

Microsoft Purview Audit: Copilot interaction events in audit search results

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R13: Privileged user data amplification 

Pillar: Identity, Apps and Data 

Administrators, senior IT staff, and other privileged users often hold access that spans organizational boundaries—including mailboxes, site collections, security groups, and configuration data that most users never reach. A Copilot-enabled admin account that is compromised or misused gives adversaries—or an inadvertent insider—an organization-wide view of data that far exceeds the exposure associated with a compromised end-user account. Because Copilot amplifies the full scope of a user’s existing access, privileged identities require the strictest governance controls. 

Mitigation applies Just-In-Time access, dedicated account separation, and elevated monitoring to ensure privileged identities are not simultaneously full administrators and active Copilot users. 

What to do:

• Use Microsoft Entra Privileged Identity Management (PIM) to enforce Just-In-Time (JIT) elevation for administrative roles. Privileged access should be time-bound, require justification, and expire automatically after the task is complete. 


• Do not assign Copilot licenses to dedicated admin accounts. Administrators should use separate work accounts for day-to-day productivity and Copilot access, keeping elevated administrative permissions away from Copilot-enabled sessions.


• Apply the strictest Conditional Access policies to any identity that holds both a Copilot license and elevated permissions. Require phishing-resistant MFA, compliant devices, and enforce token protection.


• Enable Entra ID access reviews specifically scoped to privileged role members to ensure administrative permissions are actively justified and time-limited, not held indefinitely.


• Prioritize Microsoft Purview Audit Premium for all privileged identities to capture a complete, long-retention record of Copilot interactions associated with high-privilege accounts and forward those logs to Sentinel for alerting. 

Microsoft Entra PIM: active role assignments showing time-bound expiration

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Conditional Access: policy scoped to privileged role members with phishing-resistant MFA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Layer 2 mitigations at a glance 

Each Layer 2 risk maps to a primary control and the Microsoft tool that delivers it. Microsoft Purview recurs across multiple risks because it is the central governance layer for data classification, protection, and audit visibility in the Microsoft 365 environment.

Complete your Zero Trust approach to Microsoft 365 Copilot 

Microsoft 365 Copilot does not create new permissions or expose data users cannot already access. What it does do is make existing access more discoverable, bringing years of accumulated oversharing, excessive permissions, unlabeled content, unmanaged connectors, and governance gaps into sharper focus. As a result, reducing Copilot data exposure is not a one-time cleanup effort but a continuous governance practice.  

Across this series, we’ve examined both sides of the Microsoft 365 Copilot risk equation: who can access Copilot and what Copilot can access on their behalf. Together, the Layer 1 and Layer 2 controls provide a practical, Zero Trust-aligned framework for governing identities, devices, applications, and data throughout your Copilot deployment.  

For security, compliance, identity, and IT administrators, the next step is to assess your current environment against the risks discussed throughout this series. Review sharing configurations, sensitivity labeling coverage, data loss prevention policies, access governance practices, connector management, and audit visibility to identify gaps before Copilot adoption scales.  

Addressing these gaps now can help reduce risk, strengthen compliance, and build a more secure foundation for AI-powered productivity. Use the controls discussed throughout this series to develop a Microsoft 365 Copilot deployment strategy that aligns with your organization’s security, compliance, and business requirements. For additional guidance, see the Zero Trust Overview on Microsoft Learn. 

Atil Gurcan is a Senior FastTrack Architect who works with customers to implement secure & compliant AI experiences and accelerate their digital transformation, increasing ROI for their investments with Microsoft.